Bear Creek Arsenal's New BC-15 17HMR Billet Upper Receiver

The .17HMR is one of my favorite rimfire calibers. The hot 17 caliber rimfire cartridge is both supremely accurate, and light recoiling making it a good step up from .22LR in terms of both inherent accuracy and range. Bear Creek Arsenal is following up the success of their .22WMR AR-15 upper with the release of the new BC-15 17HMR Billet Upper Receiver to give rimfire enthusiasts access to yet another popular rimfire cartridge that they can plink, hunt, or target shoot with by simply slapping it on an AR-15 lower receiver.

Read more
HOT GAT or FUDD CRAP? Ultimate .22LR Takedown or Inevitable Breakdown?

Welcome everyone to the 156th edition of ‘Hot Gat or Fudd Crap?’, one of our many series here on TFB. If you’re new to the series, this is where we look at the most obscure firearms that are actually for sale and ask the question – is this Gat a sweet deal or only has a Fudd appeal?  Each week the TFB staff weighs in with their thoughts, but readers get the final say in the poll at the bottom of each article.

Read more
AKV-721 & AK-308: New .308 Win Rifles by Kalashnikov Concern

During the ARMY 2022 exhibition, Kalashnikov Concern unveiled a number of new firearms, both for the military/LE and civilian markets. Among the new guns are two rifles chambered in 7.62x51mm NATO / .308 Winchester – the AKV-721 and AK-308. Let’s take a look at each of these new firearms.

Read more
LWRC X OTG Limited Edition Collaboration – Bazooka Green IC-A5 5.56 Rifle

There’s a limited edition LWRC/OTG IC-A5 Bazooka Green rifle incoming. The setup was featured in the video “Urban Combat Survival CQB and Room Clearing” made by Garand Thumb and Orion Training Group. Manufactured by LWRC, this 5.56 rifle is only going to be available through Louisiana Firearms,  LLC. The price is $2,880.

Read more
POTD: The LWRCI SABR 20"

The hungriest beast of them all on this blog is our Photo Of The Day. It consumes hundreds of images every month, and it has been doing so for over 8 years. Today we have the SABR, short for Sniper Assaulter Battle Rifle, made by LWRC International.

Read more
A .308 AK-47: Zastava M77 Overview

In this episode of TFBTV, James Reeves is at Zastava USA to discuss the new import of the Zastava M77 rifle. This .308 rifle is very similar to Zastava’s flagship M70 AK-type rifle and almost identical to the Zastava M90 .223 rifle, with a few differences other than the obvious caliber difference. Note that per the video, furniture that works with the M70 and M90 should also work with the M77. Zastava now offers three calibers of AK to the US civilian market, including 5.56/223, and of course 7.62×39. Check out this overview for a description of the features and accessories available for this new .308 AK.

Read more
Bear Creek Arsenal Introduces Three New AR Platform Lines

Bear Creek Arsenal has rapidly expanded its available rifle and pistol lineup for the American firearms enthusiast. In their latest newsletter, they announced they would introduce three new lines of AR platform rifles to help shooters find something that will fit their needs. These new lines will include the all-around Fieldmaster, the long-range oriented Targetmaster, and the Huntmaster – I’ll let you guess what that one is marketed for. More details on each new AR platform line are down below.

Read more
Rifle Dynamics Limited Edition Thunder Ranch RD700 AK Pistol

Back in 2020, Rifle Dynamics and Thunder Ranch introduced the Thunder Ranch AK, a rifle made to Clint Smith’s specifications. The two companies have teamed up again to release another AK, the limited edition Thunder Ranch RD700 pistol. This AK pistol bears the Thunder Ranch logo and has an exclusive Tigerstripe finish.

Read more
Public Service Announcement: Don't Start A Wildfire

Wildfires have long been a feature of life in the western states. Unfortunately, target shooting starts some of those fires. The good news is that target shooting fires are preventable, so let’s discuss how we can keep them from happening. Public lands make for some of the best shooting spots, but they are at risk of closure every time a negligent shooter starts a wildfire.

Read more
HOT GAT or FUDD CRAP? Ultimate 1911 PCC or Overmatch Travesty?

Welcome everyone to the 154th edition of ‘Hot Gat or Fudd Crap?’, one of our many series here on TFB. If you’re new to the series, this is where we look at the most obscure firearms that are actually for sale and ask the question – is this Gat a sweet deal or only has a Fudd appeal?  Each week the TFB staff weighs in with their thoughts, but readers get the final say in the poll at the bottom of each article.

Read more
The Rimfire Report: RSM Firearms MINI-50 Ruger 10/22 Conversion Kit

Hello and welcome to another edition of The Rimfire Report! This ongoing series is all about the rimfire firearm world and its many guns, sports, ammunition, and trends. Last week, we talked about the new Fletcher Rifle Works Bandera OpenTop 11/22 pistol. Since that article was posted, I’ve had the opportunity to take it to the range a few more times and thus far it has held up quite well on the reliability side of things and the pistol really has been a joy to shoot – I will be sad to see it go when I send it back to Mr. Fletcher! In that same vein, part of why I like the 10/22 platform so much is due to the sheer amount of customization options you have on the market for it. I recently stumbled upon a new limited edition conversion kit for the Ruger 10/22 rifles designed by RSM Firearms. Dubbed the MINI-50, this conversion kit takes your standard 10/22 rifle and fits it into a nice new mini Barrett M82A1 skin suit.

Read more
Type-A Rifle Co's New Ambi Billet AR10 Line of Rifles

It seems that 2022 is bringing back the heat regarding AR10 rifles. Type-A Rifle Co/BG Defense joins the fray with their new Ambi Billet AR10 line of rifles. The new line of Type-A rifles will come with the same high-end components and construction that Type-A is well known for. Type-A is also proud to announce that most of the components in the new Ambi Billet AR10 rifle lineup will be made in-house from their facility in Grand Rapids, Michigan.

Read more
Brownells Exclusive: Sons Of Liberty Gun Works M4-EXO3 Rifle Build Kit

Brownells and Sons of Liberty Gun Works (SOLGW) have teamed up to introduce an AR-15 parts kit called  M4-EXO3 Rifle Build Kit. This kit is made by SOLGW and will be available only through Brownells. It includes everything needed to assemble an AR-15 with the exception of the lower receiver.

Read more
Now Available: 3D-Printed HUXWRX FLOW 556k Rifle Suppressor

A true defensive “fighting” carbine needs to be compact, lightweight, accurate, and reliable to fill its role in the armory. Any equipment added to the carbine’s system should be an important capability of the system without dramatically impacting overall functionality. When it comes to suppressors, I believe that short and light models that are as gas-neutral as possible are the best choice for the AR-15. It seems that the new 3D-printed HUXWRX FLOW 556K has found the sweet spot between suppression and system integration.

Read more
Wolfpack Armory WP47 Pistol

Wolfpack Armory has announced that their WP47 pistol is now available for preorder. The Wolfpack Armory WP47 is an AK magazine fed AR style hybrid firearm chambered in 7.62x39mm. Let’s see what features Wolfpack has packed in this gat.

Read more
NEW Trojan Firearms TROY .308Win/6.5CM Rifles

Judging by the amount of new AR-10 pattern firearms released by American companies lately, I think it is safe to say that this is currently one of the most booming market segments in the industry. Joining the many other AR-10 style rifles and pistols introduced this year is the new Trojan Firearms TROY rifle available in .308 Winchester and 6.5 Creedmoor chamberings. Let’s take a closer look.

Read more
Anderson Manufacturing AM-10 Gen2 BREACHER 308 Pistol

Anderson Manufacturing introduced the second generation of their  AM-10 .308 Win guns at NRAAM 2022. Initially, this product line consisted of three rifles – Battle Rifle, Ranger and Marksman XL. A couple of days ago, the company announced the addition of a new member to the AM-10 family of firearms, the AM-10 Gen2 Breacher pistol.

Read more
New Faxon Sentinel .308 Winchester and 6.5 Creedmoor Rifles

Faxon Firearms has just announced the introduction of two new rifles to their Summit Sentinel lineup of AR-10 pattern firearms. The new Faxon Sentinel rifles are chambered in .308 Winchester and 6.5 Creedmoor. Both new rifles will retail for just under $2,000 and come standard with billet aluminum receivers, heavy fluted barrels, Faxon M-LOK handguards, and ambidextrous controls.

Read more
New MCX Zero Retention Clamp (ZRC) SD from Arisaka Defense

The SIG Sauer MCX Virtus has been an extremely configurable and popular 5.56 rifle that really scratches that itch for those who want something other than a standard AR-15. However, when it comes time to do maintenance on the Virtus, many users have complained that when shooting from a barrier or other supported position, the handguard would flex significantly causing your attached laser device to lose zero even when minor pressure is being applied. The new patent pending Arisaka Zero Retention Clamp (ZRC) greatly reduces zero shift to lasers and handguard mounted iron sights with this version being specifically designed for the MCX Virtus equipped with either the SIG Sauer SD handguard or Midwest Industries Suppressor M-LOK handguard.

Read more
Stag Arms Upgrade The Stag 15 Tactical Rifle Line

It was time for an upgrade – that’s simply why Stag Arms decided to upgrade their Stag 15 Tactical rifle line. The new 2022 Stag-15 Tactical rifles have six new features: Ballistic Advantage Hanson profile barrels, VG6 Delta flash hiders, ambidextrous configurable safeties, Breach ambidextrous charging handles, Hiperfire RBT triggers, and the upgraded rifles come with Magpul Gen3 PMAG magazines. Let’s take a closer look.

Read more
SILENCER SATURDAY #237: Back Pressure Beast – B&T USA 7.62 RBS Compact SF

Good afternoon everyone and welcome back to TFB’s Silencer Saturday brought to you by Yankee Hill Machine, manufacturers of the YHM Turbo K rifle suppressor. Last week, after teasing it for a few months, we finally got around to shooting the KAC 5.56mm QDC/CQB – probably the most sought after silencer currently on the market. Today we dive back into the world of B&T USA with a look at a back pressure beast of a suppressor – the7.62 RBS Compact SF QDR. Is it worth its weight? Let’s take a look.

Read more
POTD: The FN FNC

One of the purposes of TFB’s  Photo Of The Day is to broaden the audience for the excellent work done by photographers of firearms. In this case  Cinematic Arms and his photos of the FNC. FNC stands for Fabrique Nationale Carabine.

Read more
TFB Review: DIY KelTec RSB SU16 Bullpup – The Fugliest Bullpup

Last February my FFL acquired a large estate sale of firearms. Most of them were mundane Girsans, Bersas, and PSA lowers. There are other guns but the Keltec SU16 box piqued my interest. This is where I discovered the fugliest bullpup. When we opened the box, this abomination was lurking inside. We were so confused by what we saw. I looked at it more closely and decided I should adopt this SU16 bullpup and share it with the world.

Read more
Faxon Firearms SENTINEL 8.6 Blackout AR-10s Now Available

At SHOT Show 2022, Faxon Firearm in collaboration with Q LLC introduced bolt action and semi-auto firearms chambered in 8.6 Blackout. The 8.6BLK is a .338 caliber cartridge developed by Q and Faxon designed the guns chambered in this cartridge, more importantly, they were able to make barrels with an extremely fast twist rate of 1:3″ required to stabilize the heavy 300-grain bullets of subsonic 8.6BLK loads. Faxon Firearms has recently announced that their Sentinel series of AR-10 pattern semi-auto rifles chambered in 8.6 Blackout is now available for preorder.

Read more
TFB Review: CZ's New Bren 2 MS Pistol

In today’s rifle market, there are endless variants of the beloved AR-15. There’s a good reason the AR-15 is so popular and considered America’s Rifle with its ergonomics and accuracy along with reliability. The problem is once you own a few, they become fairly common and lately, that’s where I’ve been. I wanted something different in a rifle, something that is easy to shoot but isn’t the same as every other rifle. I started looking at the CZ-USA Bren 2 MS a while back and after some debating, I ended up purchasing one to put through its paces. Let’s take a closer look at the CZ’s new Bren 2 MS pistol.

Read more
Hera Arms H22 Chassis for Ruger 10/22 Rifles

Hera Arms has added to their product line a new chassis designed for Ruger 10/22 semi-auto rimfire rifles. Overall, the new Hera Arms H22 chassis looks similar to and has borrowed many design solutions from their H7 bolt-action rifle chassis. Let’s take a closer look at the Hera Arms H22 chassis.

Read more
TFB Armorer's Bench: M1 Garand Gas System and Ammunition Solutions

Welcome everyone to the TFB Armorer’s Bench! As mentioned in the little blurb, this series will focus on a lot of home armorer and gunsmith activities. In this article sponsored by  WheelerTiptonCaldwell, and  Frankford Arsenal, I decided to dive into the rabbit hole of attempting to explain the M1 Garand’s gas system, why average modern ammunition is not ideal for the rifle, and solutions to that issue. In the last few years working at a gun shop, I have noticed the increase in the popularity of older firearms among younger people. People will come in whether it is those young folks or older ones that just got a dream gun (an M1 Garand) from when they were younger and they will ask for 30-06 ammo in general. Yes, the rifle will function and shoot any type of .30-06 Springfield on the market but unfortunately, the gas system is not engineered to deal with the velocities and pressures produced by modern ammunition. The result? Their piece of nostalgia and history ends up damaged or broken. All of that being said let’s dive right into the M1 Garand gas system and ammunition solutions.

Read more
SILENCER SATURDAY #234: Swiss Watch – B&T USA ROTEX-X Carbine Performance

Good afternoon everyone and welcome back to TFB’s Silencer Saturday brought to you by Yankee Hill Machine, manufacturers of the small, but mighty, YHM Turbo K suppressor. Last week we took the KAC NT4 out on the range for some select fire testing. This week we stick with a similar bayonet-style mounting system of the B&T ROTEX-X carbine and rifle suppressor. How does it sound? Let’s take a look.

Read more
New SIG M400-DH3 Competition Rifle Designed By Daniel Horner

The shooting and competition season in finally in full swing. Also known as the time between winter reloading and fall hunting, the professional shooting world uses the summer to display skill mastery, talent, and dedication to the world of 3 gun competitions. And team SIG’s Daniel Horner is about as good as it gets. Horner has developed the SIG M400-DH3 custom rifle with ambidextrous controls, a slim handguard, and a two-stage DH3 Timney Trigger.

Read more
Exclusive DRD Tactical Sub-6 Rifles Now Available from Zanders

DRD Tactical and Zanders Sporting Goods have teamed up to release the new Zanders Exclusive DRD Tactical Sub-6 Rifle. The Sub-6 is a lightweight AK/AR mashup that combines the reliability of an AK with the manual of arms and modularity of an AR in a lightweight package. The new rifle will be available in 4 different color configurations and will initially be offered in 5.56/.223.

Read more